I reviewed 7 of the most popular hand planes online and found that overall, the Stanley no 4 12-404 is the best manual hand plane.
In the years that I have spent woodworking, handtools have always come up top for me. I prefer them for their accuracy as well as for their reliability. Thus, I prefer hand planes over electric hand planers. You can get hair-perfect accuracy with a hand plane once you get used to it.
The only advantage that you will get from an electric planer is speed, which is good if you need to work on large batches in short time frames. They are not the best for beginners, and only the expensive ones will give you the accuracy you can get from hand planes.
Maintaining hand planes is also part of their appeal. You can easily take out all the pieces, hone the blade, and tune the parts to your liking. The sharpening method is the same as your knives and chisels. It is a process that I have come to enjoy, and I believe you will, too, once you get into it.
Why Stanley 12-404 No. 4 plane?
On Sale
- The hand planer for woodworking has a cast-iron base with precision-ground sides and bottom
- The wood plane has an epoxy coating for durability and long life
- The bench plane comes with a hardened, tempered steel cutter edge for durability
The Stanley 12-404 No. 4 hand plane represents a fantastic balance between affordability and quality. As with all budget options, the sole of the piece that you get might need grounding to get it truly flat. The blade will require some sharpening and honing, and this is true even for some expensive pieces, although it may not be as frequent.
The 12-404 hand plane from Stanley, after you have taken it through the one-time grinding process, has the potential to become your only hand plane. This is especially good for beginners and those who are on a tight budget.
In exchange for a few hours of work, you are shaving off more than a hundred dollars from the price of a good hand plane. While it is not perfect, such as the two-screw adjustment system that can weird out many users, it is still a great bargain and will last decades if used with care.
Quick Comparison
Top Pick
Best Block Plane
Best Jack Plane
Best Jointer Plane
Best Japanese Plane
My List Of The Best Woodworking Hand Planes:
1. Best Overall: STANLEY No.4 Hand Planer (12-404)
On Sale
- The hand planer for woodworking has a cast-iron base with precision-ground sides and bottom
- The wood plane has an epoxy coating for durability and long life
- The bench plane comes with a hardened, tempered steel cutter edge for durability
There are a lot of options to choose from when it comes to picking the best overall plane. Stanley has been successfully relied upon for decades by carpenters and woodworkers everywhere. They started the no 1 to 8 sizing pattern, and all the other companies followed afterward. They are known for their expensive hand planes, which cost $200 and more. However, the No 4 12-404 is like a well-kept industry secret, given its price.
Like all other mass-manufactured tools, you do get the odd lemon. Most of them will need some tuning, such as flattening the sole and the sides, honing the blade, etc. As a beginner, if this seems daunting. Don’t worry, it is a good thing to get used to.
I choose this as the best overall because once you are done with your grinding and tuning, you will get a reliable workhorse for a plane. One that will see you through decades of work.
PROS
CONS
If you are not afraid of getting down to flattening and sharpening right out of the box, you will be hard put to get a better deal on a plane like this. Great for beginners as well as for professionals looking for a backup or rough planning piece.
2. Best Block Plane: STANLEY Hand Planer (12-220)
- ST PLANE BLOCK
- ST PLANE BLOCK
- ST PLANE BLOCK
Check Today’s Price
Features and benefits as advertised by the seller
This piece by Stanley is the best block plane for the price. It is an extremely handy piece of equipment to have for intermediate to expert woodworkers. If you are a beginner but need to work on finishing end grain and smaller spots, you might also appreciate its compact, one-handed design and hard steel blade.
As a bevel-up block plane, it has the advantage of getting more control with shallower cuts. Perfect for those end grains, but it might catch the grain in other parts of the wood. Once you get used to it, though, it is a good piece to have on hand for finishing your projects. I especially like the screw adjustment on the blade – something that a lot of budget block planes lack.
PROS
CONS
Like all budget hand planes, this one will most likely need some amount of sharpening and tuning before you can use it. Once you do tune it up, you will be pleasantly surprised at how well it performs. With proper time and effort invested in maintaining it, it can serve as your go-to block plane from here on out.
3. Best Jack Plane: Stanley 1-12-137 62-Low Angle Plane
- One-piece base and frog virtually eliminate chatter and increased accuracy
- Patented lateral adjustment locking feature
- Ductile iron castings for weight and durability
This list is getting pretty heavy on the Stanley planes and with good reason. Their reputation is built on decades of experience in creating some of the best woodworking tools in the market. This low-angle plane is no exception. It charges a hefty price for it but manages to live up to the proportionately increased expectations.
Low-angle planes are versatile tools because of the way the blades are positioned. With a couple of spare blades ground at various bevel angles, this can become your main plane for everything from roughing to smoothing.
PROS
CONS
Buy this if you want a professional piece that doesn’t require much work out of the box. It will last you a lifetime.
4. Best Jointer Plane: Grizzly Industrial H7568-22″ Plane
- Used for final finishing work
- Package dimensions: 6″ x 22.4″ x 3.5″
- Approximate weight: 8.55 lbs
Many of you may think it is best to do your jointing with a dedicated machine. Owning this jointer plane from Grizzly will quickly change your mind. Machines are only good when you have tons of money to invest and a lot of rough work to get through quickly. If you want a smooth stock that slides true, nothing beats jointing by hand.
Even if you are using a machine, you can finish off the job using the Grizzly and be amazed at the results. The 22” length is convenient for dealing with large pieces with dips and bumps to even out.