Best Dremel Bits For Wood Carving: 2025 Review & Guide

In this article, I have reviewed 7 sets of Dremel branded and third-party Dremel-compatible bits and burrs. I found that the Taita Tools 20 pc set offers the best Dremel wood carving bits.

20PC Carbide Double/Single Cut Burr Set - 3mm...

20PC Carbide Double/Single Cut Burr Set – 3mm…

Amazon Prime

I have tried almost all kinds of rotary tool bits that are out there in my years of wood carving. So, I can tell you upfront that you will want to have a good variety of bits at your disposal. However, to get started, having a basic set like the one mentioned above will stand you in good stead.

Please note that Dremel uses ⅛” shaft rotary bits, and larger rotary tools like palm routers use ¼” rotary bits. So always buy ⅛” shaft bits for your Dremel and similar rotary tools.

If you want to know about the best Dremel bits for wood carving, then keep reading.

Best Dremel Bits For Wood Carving:

1. Best Overall – Taita Tools 20pc Double Cut Burrs

20PC Carbide Double/Single Cut Burr Set - 3mm...

Wood carving bits need to do two things very well — make precise cuts and maintain good balance. The first one is obvious. The second one is so that it doesn’t vibrate all over the place. Most cheap sets have a problem with the second point (apart from the fact that they tend to break very easily).

The Taita Tools set is well-built and designed for precision work. These burrs are absolutely perfect for most general wood carving work.

PROS

  • Well balanced
  • Affordable price for 20 pieces
  • Long-lasting
  • Makes precise cuts

CONS

  • Not everyone needs so many burrs
  • Doesn’t have different shapes like a ball head or teardrop
  • Meant only for wood and plastic. Cannot cut soft metal
  • Cannot do very fine detailing

Overall, this is an excellent set to work with, but you might have to supplement it with a few extra burrs for special situations. These are great for general-purpose wood carving. If you need to take off a lot of material regularly, you should look at some specialized burrs from Kutzall. I will cover them later in this list.

Check Price on Amazon

2. Best For Fine Detailing and Sculpting – Yurinwoo 5 Piece HSS Set

Wood Carving Tools, 5 PCS HSS Engraving Drill Bit...

  • 【WIDELY USE】- 5 different sizes(3mm,4mm,5mm,6mm,8mm) carving too Widely applied to various kinds soft woods for DIY, wood carving, engraving, model making, house repair and other wood working, a…
  • 【MATERIAL】- Carving Tool made of high quality High Speed Steel HSS, extremely strong and sharp, long life, anti-corrosion, heat-resistance, sturdy and durable.
  • 【HIGH EFFICIENCY】- Carving bits come with tricuspid design- accurate centering for sharp and precise countersinking. Three sided arc surface flute type extremely sharp can fast discharge chips…

These might seem a little expensive at first for just five pieces, but they are worth it. This set is the same shape burr in 5 different, commonly used sizes. They are designed for extremely fine detailing work. Depending on your style of wood carving, you can even make these your first set of wood carving bits.

HSS stands for High-Speed Steel. As the name suggests, this material is designed for high-speed use. This makes it perfect for use with your Dremel at top speeds if required.

PROS

  • Designed for fine detailing
  • Long-lasting, high-quality material
  • Balanced and centered for jitter-free use
  • Perfect for sculpting small intricate pieces

CONS

  • Not suitable for every type of wood carving work
  • It is not useful for roughing out pieces before doing details
  • Not ideal for texturing and shaping

Get these as your additional set for the times when you need to make very fine details and cuts. This set is meant for small projects or for making small details on a larger piece. These are great for creating figurines and other detailed pieces.

Check Price on Amazon

3. Best for Fine Engraving – Dremel 689-01

Dremel 689-01 Carving and Engraving Rotary Tool...

  • This 11-piece accessory kit is specially curated to perform all carving and engraving applications making it easy to express your creativity.
  • Rotary tool accessory set comes in a compact reusable storage box with 11 rotary accessories ideal for etching, engraving, grinding, and sharpening.
  • Engraving/Carving accessories: 105 1/32″ Engraving Bit (x1), 106 1/16″ Engraving Bit (x1), 107 3/32″ Engraving Bit (x1), 108 1/32″ Engraving Bit (x1), 7103 5/64″ Diamond Wheel Point (x1), 7134 5/64″…

This is an affordable set of Dremel-manufactured burrs that are ideal for engraving and finishing projects. Especially projects that have a lot of small shapes and areas that need a smooth and precise finish. Even though the description says it is meant for carving and engraving, it is not ideal for actual wood carving.

This is because it is not designed to take off a lot of material at once, which is necessary when creating the basic shape of your piece. You can use the previously mentioned set of Taita tools from a plain block of wood to a finished piece.

With this set, you can engrave delicate designs on a piece of wood but not shape it.

PROS

  • High-quality manufacturing
  • Precise centering
  • Long-lasting bits
  • It can be used on glass and metal

CONS

  • It is not meant to shape
  • Not fit for sculpting or carving in the round
  • You may not require the grinding bits that come with it.

I recommend these to those who are creating small pieces that require engraving and not shaping/cutting. Great for engraving names and designs on things like coasters, wooden spoons, etc.

Check Price on Amazon

4. Best For General Purpose Use – Dremel Rotary Tool Accessory Kit- 710-08

Dremel 160-Piece Rotary Tool Accessory Kit with EZ...

  • ASSORTED KIT: The Dremel 160-piece Multipurpose Accessory set is the complete start-up kit you need to complete a wide range of DIY projects. Ideal for cutting, sanding, polishing, grinding, and…
  • EZ LOCK TECHNOLOGY: Accessory set includes a variety of EZ Lock rotary accessories including the EZ Twist nose cap wrench, EZ Lock mandrel, and EZ Lock cut-off wheels. The patented Dremel EZ Lock…
  • EASY ORGANIZATION: Accessory set includes a reusable storage bins and lift-out trays for the included bits.

This set is a little expensive because it comes with 160 pieces across several categories. These are great to have in your workshop for general-purpose use. There are engraving bits, cutting wheels, sanding drums, grinding bits, etc. All woodcarvers will need to use these things at some point.

So this is more of a catch-all set that is good to have but not necessary. Once you have invested in the bits you need the most, only then should you invest in this set. You will thank yourself once you do. Unexpected situations often come up that call for something other than a specialized wood carving bit.

PROS

  • Great deal for the number of accessories provided
  • Official Dremel quality
  • It can be used for materials other than wood
  • Relatively affordable for the number of pieces provided

CONS

  • Not a purpose-made wood carving set
  • Rather expensive for beginners
  • The EZ lock system doesn’t always hold up to intense use

I recommend this set for those who are doing other projects, such as wood carving. If you are only into wood carving, you can probably skip this without missing anything much. However, if you have a DIY bug like me or want to experiment a little (also me!), it’s an excellent set to have.

Check Price on Amazon

5. Best For Beginners – Lukcase Double Cut Carbide Rotary Burr Set – 10 Pcs

On Sale

Double Cut Carbide Rotary Burr Set - 10 Pcs 1/8'...

  • CARBIDE DIE GRINDER BITS: These carbide rotary burr set, with 1/8” shank is made from Tungsten Carbide. Total Length:45-50mm, Cutting Diameter 1/4”, Shank Length 35mm, Shank Diameter 1/8”.
  • DOUBLE CUT DESIGN: The groove lines of these carbide rotary burr’s head are crossed, which makes it more suitable for materials with relatively low density, such as wooden, plastic and aluminum.
  • ADAPTABILITY: 1/8” shank fits dremel and most small rotary tools with three jaw chuck for accurate centering. An ideal choice for your DIY woodworking, carving, engraving, and polishing.

This is a great set that has shaped burrs in different styles. These are similar to the Taita tools set and have the same double-cut texture for fast cuts. They are not as precise, however, and are meant more for roughing out shapes.

Since they cut fast and smooth on most wood, they are an excellent choice for beginners. The various shapes are also my favorite feature. You can use these shapes to create various textures and cuts that are not easily doable with straight burrs.

PROS

  • Affordable price for 10 pieces
  • Beginner-friendly
  • Double-cut design suitable for high-speed use
  • Shaped burrs give a wide variety of looks
  • Suitable for roughing out shapes

CONS

  • All burrs are the same size, just the shape varies
  • Not as precise as some of the other sets on this list
  • It is not useful for fine-detailing

I recommend this set for those who are just getting started or those looking for various shapes to help in roughing out their pieces. These will take out material fast and work well on most wood.

Check Price on Amazon

6. Best For Roughing Work – Kutzall Extreme Rotary Burrs

# Preview Product
1

Kutzall Extreme Flame Rotary Burr, 1⁄8' Shaft,...

Kutzall Extreme Flame Rotary Burr, 1⁄8″ Shaft,…
2

Kutzall Original Flame Rotary Burr, 1⁄8' Shaft,...

Kutzall Original Flame Rotary Burr, 1⁄8″ Shaft,…
3

Kutzall Original Flame Rotary Burr, 1⁄8' Shaft,...

Kutzall Original Flame Rotary Burr, 1⁄8″ Shaft,…

Kutzall makes specialized rotary burrs. They come in three main varieties — Extreme (Very Coarse), Coarse and Fine. Each type comes in various shapes like Sphere, Cylinder, Taper, etc.

As you might have guessed from the name, the Extreme type is meant to take off large amounts of material very quickly. It is by far the best burr out there for this job. The only caveat is that they are expensive. One Kutzall bit will buy you a whole set of other regular burrs with money to spare.

I am including just one type and shape for the sake of brevity, but I suggest you take a close look at all their offerings. All the ⅛” burrs will fit your Dremel. The fine ones are meant to create a smoother finish, and the coarser you get, the rougher the finish.

These are meant for professional woodcarvers or serious enthusiasts/hobbyists. These last a very long time and are very high-quality. Not even Dremel has such specialized bits in their lineup of official Dremel accessories. With the right shape and coarseness, you will need just a few of these to work on a large variety of projects.

PROS

  • Purpose-built for wood carving
  • Very high quality and long-lasting
  • 3 levels of coarseness
  • Perfect for roughing and shaping

CONS